Name: Isolating switch DX3-IS 2 pole 40A
SKU: 406449

Isolating switch DX3-IS 2 pole 40A

DX³ LEGRAND

Isolating switch DX3-IS 2 pole 40A

REF. 406449 EAN. 3245064064491

Compare You can only compare 4 products, you must remove 1 to add this one

Rated current 40 A Category of use AC - 22A Rated voltage 400V~
Can be supplied either by copper cable, prong busbar (top side or bottom side).
Can be equipped with Legrand DX3 auxiliaries and Accessories .
Protected against solid bodies larger than 12,5mm ("fingerproof"): IP20 according to IEC/EN 60529 standard.
This device complies with substance-restriction requirements and has been designed in an environmentally conscious process.

This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product's specific mounting location. Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.

Fitted with DIN rail clamps, on top side and on bottom side to facilitate the installation on the DIN rail.

Fitted with a label holder allowing a clear, visible and convenient identification of the circuit. ON and OFF indication printed on the handle respectively on red and green backgrounds for an easy identification of the status of the contacts.

Provedení jako hlavní vypínač	Yes
Version as maintenance-/service switch	No
Provedení jako bezpečnostní spínač	Yes
Provedení jako zařízení nouzového vypnutí	No
Max. rated operation voltage Ue AC	400 V
Jmenovitý trvalý proud Iu	100 A
Conditioned rated short-circuit current Iq	4500 kA
Počet pólů	2
Motorový pohon volitelně	No
Motorový pohon integrovaný	No

Konstrukce přístroje	Built-in device fixed built-in technique
Vhodné pro pozemní montáž	No
Vhodné pro čelní upevnění 4 otvory	No
Vhodné pro čelní upevnění centrální	No
Vhodné pro rozváděčovou vestavbu	Yes
Vhodné pro střední montáž	No
Typ ovládacího prvku	Toggle
Blokovatelné	Yes
Způsob připojení hlavního obvodu	Screw connection
Stupeň krytí (IP) přední strana	IP20

Isolating switch DX3-IS 2 pole 40A