Name: CX³ with Netatmo CONNECTED DRY CONTACT with maintained contacts 100 - 240V~ supplied with a single-phase 80A closed coil
SKU: 412173

CX³ with Netatmo CONNECTED DRY CONTACT with maintained contacts 100 - 240V~ supplied with a single-phase 80A closed coil

CX³ with Netatmo Legrand

CX³ with Netatmo CONNECTED DRY CONTACT with maintained contacts 100 - 240V~ supplied with a single-phase 80A closed coil

REF. 412173 EAN. 3414972324885

Compare You can only compare 4 products, you must remove 1 to add this one

Equipped with a dry contact input : 12V/30V DC or 230V ~ Imin 0,01A / Imax 2A
Maintained contact. Normaly closed or normaly closed (NOT compatible With shutters and garage doors)
Energy consumption : equipped with a single-phase up to 80A closed measurement coil to get energy data to whom the Connected Dry Contact is wired to.
Compatible with the load shedding scenario. Works with the Connected Load Shedder 412172
Keep constantly up-to-date with the consumption of your appliance and remotely remote-control it from your smartphone wherever you are within the Home + Control app.

Requires beforehand the installation of a "With Netatmo" gateway such as for example the Control module, the Power-outlet gateway, etc… When working on electricity for your safety turn-off the main protection device in the electrical panel-board.

Easy cabling part. All configuration steps are done within the smartphone app Home + Control

Scheduling: automatic opening and reclosing action scenarios based on a timeline. (daily/weekly/specific events such as “holidays”) or the Off-peak/peak time electrical contract

Versatile offer: can fit anykind of loads with dry contact input terminal such as electrical vehicules charging stations, watering system, ventilation system, etc…
Native integration with leading smart home ecosystem environments and voice assistants.
Part of the Legrand Connected Home environement. Works with Home+ Control smartphone app

Supply voltage AC 50 Hz (Min-Max)	100-240 V
Supply voltage AC 60 Hz (Min-Max)	100-240 V
Voltage type (supply voltage)	AC
Number of digital inputs	1
Number of digital outputs	1
Digital inputs configurable	No
Digital outputs configurable	No
Input current at signal 1	0.5 mA
Permitted voltage at input (Min-Max)	0-240 V
Type of voltage (input voltage)	AC
Type of digital output	Relay
Permitted voltage at output (Min-Max)	5-250 V
Type of output voltage	AC/DC
Short-circuit protection, outputs available	No
Number of HW-interfaces industrial Ethernet	0
Number of interfaces PROFINET	0
Number of HW-interfaces RS-232	0
Number of HW-interfaces RS-422	0
Number of HW-interfaces RS-485	0
Number of HW-interfaces serial TTY	0
Number of HW-interfaces parallel	0
Number of HW-interfaces wireless	1
Number of HW-interfaces USB	0
Number of HW-interfaces other	0
With optical interface	No
Supporting protocol for TCP/IP	No
Supporting protocol for PROFIBUS	No
Supporting protocol for CAN	No
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	No
Supporting protocol for KNX	No
Supporting protocol for Modbus	No
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No

Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Mobile communications standard 3G (UMTS)	No
IO link master	No
System accessory	No
Degree of protection (IP)	IP3X
Type of electric connection	Screw connection
Time delay at signal change (Min-Max)	200-300 ms
Fieldbus connection over separate bus coupler possible	No
Suitable for rail mounting	Yes
Wall mounting/direct mounting	No
Front built-in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
SIL according to IEC 61508	None
Performance level according to EN ISO 13849-1	None
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	None
Explosion safety category for dust	None
Width	17.8 mm
Height	95.9 mm
Depth	71 mm

CX³ with Netatmo CONNECTED DRY CONTACT with maintained contacts 100 - 240V~ supplied with a single-phase 80A closed coil