Black cable tie Colson U.V. protected with internal teeth width 9mm and lenght 498 mm

Name: Black cable tie Colson U.V. protected with internal teeth width 9mm and lenght 498 mm
SKU: 031920

Colson™ LEGRAND

REF. 031920 EAN. 3414971132252

Compare You can only compare 4 products, you must remove 1 to add this one

The temporary zone (with arrows) allows the clamps to be put on hold before final tightening. The manual snap - in area allows the insertion effort to be reduced before final tightening on the mechanical area with the tool ref 031996.mécanique avec l'outil ref 031996.
Tear - off performance. Conformity to EN 62275
Ergonomic heads with soft curves for more comfort during handling. Single head
Resistance to UV, chemical agents, temperature,-Max. temperature in permanent use 85 °C- Minimum temperature in permanent use (clamp installed)-40 °C- Minimum installation temperature-30 °C".

A packaging with a reinforced bottom and pre-cuts to access the collars on the front or top of the box. The belt clip system allows the box to be used on site as a handyman.

Ergonomics of Colson collars.3 application zones patented by Legrand. Practical and ingenious packaging with several pre-cuts and a belt attachment system to make the collars easier to use during installation.
Colson clamps are also available in grey for perfect adaptation to IRL type tubes.

Band width	9 mm
Length belt/tape/tie	498 mm
Tie thickness	2.4 mm
Min. tensile strength	530 N
Operating temperature (Min-Max)	-40-85 °C
Mounting temperature (Min-Max)	-30-85 °C
Model	External toothing
Band closure	Double lock head
Material	Plastic
Material quality	Polyamide flame retardant

4 documents

Select all

Technical Sheet

F00139FR-11.pdf pdf (1.1 Mo)

Technical Sheet

F00139EN-10.pdf pdf (1.16 Mo)

Technical Sheet

F002529FR-00.pdf pdf (0.45 Mo)

Technical Sheet

F002529EN-00.pdf pdf (0.44 Mo)

1 document

Select all

PEP

LGRP-00673-V01.01-EN.pdf pdf (0.56 Mo)