Stabilised mono switching power supply - 20-60 W - output 48 V= - 60 W

Name: Stabilised mono switching power supply - 20-60 W - output 48 V= - 60 W
SKU: 146609

LEGRAND

REF. 146609 EAN. 3414970543233

Compare You can only compare 4 products, you must remove 1 to add this one

Stabilised switched mode power supplies - single-phase - Conforming to standards UL 508, IEC EN 60950 - 1 and IEC EN 61204 - 3 - UL - approved in USA and Canada - Operating frequency : 50/60 Hz - Output voltage present indicator - Potentiometer for adjusting the output voltage on front panel - With signal or relay contact for feedback on the status of the active output voltage (except 75 W) - Connection with copper conductors only - For mounting on a symmetrical rail depth 7.5 mm and 15 mm
Single-phase 20 - 60 W - No - load power consumption - Adjustable output voltage - Plastic casingInput voltage : 100 to 240 V~ Output voltage : 48 V= - Nominal power : 60 W - Nominal rating : 1.25 A - Setting range : 48 to 56 V - Width : 40 mm

Voltage type (supply voltage)	AC/DC
1st secondary output voltage	24-48 V
Max. output current 1	1.25 A
Secondary voltage adjustable	Yes
Nominal value output voltage 1	24 V
Nominal value output current 1	1.25 A
Short-circuit-proof	Yes
Rated supply voltage AC 50 Hz	100-240 V
Rated supply voltage AC 60 Hz	100-240 V
Rated supply voltage DC	120-370 V
Output voltage stabilized	Yes
Power output	60 W
Stabilized	Yes
Type of electric connection	Screw connection

Suitable for rail mounting	Yes
Suitable for wall mounting	No
Suitable for distribution board	No
Built-in width	40 mm
Direct mounting possible	Yes
Width	40 mm
Height	90 mm
Depth	100 mm
Suitable for safety functions	Yes
Operating / setting temperature	-20-55 °C
Frequency	50-60 Hz
Electric supplying direction	From the bottom
Terminal marking indication	Yes
Label space/information surface	No