Name: RCCB DX3 2 pole 80A type A 30mA screw terminals
SKU: 411557

RCCB DX3 2 pole 80A type A 30mA screw terminals

DX³ LEGRAND

RCCB DX3 2 pole 80A type A 30mA screw terminals

REF. 411557 EAN. 3245064115575

Compare You can only compare 4 products, you must remove 1 to add this one

Screw terminals top side for supply by cables. Load connection bottom side by screw terminals for cables.
A - type for the detection of AC and DC component faults
Width = 2 modules
Fitted with a test button, to be used frequently to check the tripping of the residual current function. This device complies with substance-restriction requirements and has been designed in an environmentally conscious process. Protected against solid bodies larger than 12,5mm ("fingerproof"): IP20 according to IEC/EN 60529 standard.

This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product's specific mounting location. Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.

Fitted with DIN rail clamps, on top side and on bottom side to facilitate the installation on the DIN rail.

Fitted with a label holder allowing a clear, visible and convenient identification of the circuit. On and OFF indication printed on the handle respectively on red and green backgrounds for an easy identification of the status of the RCCB

Number of poles	2
Rated voltage	230 V
Rated current	80 A
Rated fault current	0.03 A
Rated insulation voltage Ui	250 V
Rated impulse withstand voltage Uimp	4 kV
Mounting method	DIN rail
Leakage current type	A
Selective protection	No
Short-time delayed tripping	No
Short-circuit breaking capacity (Icw)	10 kA
Surge current capacity	0.25 kA
Voltage type	AC
With interlocking device	Yes
Frequency	50 Hz
Additional equipment possible	Yes
Degree of protection (IP)	IP20
Width in number of modular spacings	2
Built-in depth	44 mm

Ambient temperature during operating	-25-60 °C
Pollution degree	2
Connectable conductor cross section multi-wired	0.75-35 mm²
Connectable conductor cross section solid-core	0.75-50 mm²
RAL-number (similar)	7035
Explosion-proof	No
Width	35.6 mm
Height	94.8 mm
Depth	77.8 mm
Degree of impact strength (IK)	IK04
Storage temperature	-40-70 °C
Electric supplying direction	By the top or bottom
Terminal marking indication	No
Stress test conformity (1000V)	Yes
Colour	Grey
Halogen free	Yes
Connection type	Screwed terminal , Busbar and cable
Label space/information surface	Yes

RCCB DX3 2 pole 80A type A 30mA screw terminals