Logo print

title
title

RCBO DX3 10000A 1 pole 16A curve C type A 10mA

DX³ LEGRAND

RCBO DX3 10000A 1 pole 16A curve C type A 10mA

REF. 418974 EAN. 3414971023055
Download product sheet
You can only compare 4 products, you must remove 1 to add this one
Product charateristics
  • Breaking capacity 10000A according to IEC 61009 - 1 standard for household installations. Tripping threshold in case of short - circuiting between 80A and 160A (C curve between 5 In and 10 In).
  • Residual current sensitivity 10mA to protect persons against direct and indirect contact and installations against fire hazards due to a persistent earth fault current. A type for the detection of AC and pulsating DC residual currents.
  • Neutral cable (blue) to be connected to the Neutral terminal block within the cabinet. Functional Earth flexible cable (white) to be connected to the Earth terminal block to ensure the operation of the residual current protection in case of an unintended opening of the Neutral circuit. Length 900mm.
  • Can be supplied from the bottom side either by copper cable, prong busbar or fork busbar. Protected against solid bodies larger than 12,5mm ("fingerproof"): IP20 according to IEC/EN 60529 standard. Maximum level of limitation of the let-through energy (energy limitation class 3 according to IEC 61009-1 standard).
  • Can be equipped with Legrand DX3 auxiliaries and accessories. This device complies with substance-restriction requirements and has been designed in an environmentally conscious process.
Recommendation / Restriction
  • This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to a risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product's specific mounting location. Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.

The product's benefits

Installation
  • Suitable for installation within British standard consumer units and 3-phase distribution boards (load centers). Fitted with two DIN rail clamps, one top side and one bottom side, allowing an independent removal of this product when the busbar supplying the row is still in place.
Usage
  • Fitted with a label holder allowing a clear, visible and convenient identification of the circuit. An ON and OFF indication printed on the handle respectively on red and green backgrounds for an easy identification of the status of the RCBO.
Avantages
  • Compact size 97mm height.
  • Fitted with Neutral lead and Functional Earth cable 900mm length.
  • Fitted with one clamp on each side for a simple and convenient installation.

Technical characteristics

Number of poles (total) 1
Number of protected poles 1
Rated voltage 240 V
Rated insulation voltage Ui 500 V
Rated impulse withstand voltage Uimp 4000 kV
Rated current 16 A
Rated fault current 0.01 A
Leakage current type A
Current limiting class 3
Rated short-circuit breaking capacity according to IEC 60947-2 10 kA
Rated short-circuit breaking capacity Icn according to EN 61009-1 10000 kA
Disconnection characteristic Undelayed
Voltage type AC
Frequency 50/60 Hz
Release characteristic C
Concurrently switching neutral conductor Yes
With interlocking device Yes
Pollution degree 2
Ambient temperature during operating -25-70 °C
Width in number of modular spacings 1
Built-in depth 74.4 mm
Flush-mounted installation No
Anti-nuisance tripping version No
Degree of protection (IP) IP20
Connectable conductor cross section solid-core 0.75-16 mm²
Connectable conductor cross section multi-wired 0.75-10 mm²
Width 17.7 mm
Height 97 mm
Depth 74.4 mm
degree of impact strength (IK) IK02
Storage temperature -40-70 °C
Nominal voltage 170-264 V
Electric supplying direction Other
Terminal marking indication Yes
Stress test conformity (1000V) Yes
Colour Grey
RAL-number 7035
Halogen free Yes
Connection type Screwed terminal , Busbar and cable
Label space/information surface Yes
Mounting method DIN rail

Documentation

2 documents
Instruction Use
LE09935AB.pdf pdf (1.52 Mo)
Technical Sheet
F02714EN-01.pdf pdf (0.58 Mo)
1 document
Catalogue Commercial Page
ex223001_0061.pdf pdf (0.1 Mo)
1 document
Agreement
OC / CB-IT-20333 (0.21 Mo)
SELECT AN ACTION