Logo print

Accessories | Legrand _none

FILTERS
Clear all
Category
Technical characteristics
title
LEGRAND
REF. 040149

Active power compensator
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND
REF. 039866

Type-C USB 3.1 male to HDMI female adaptor - in plastic bag with hook
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND
REF. 051412

Type-C USB 3.1 male to HDMI female adaptor - in plastic bag
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND Mosaic™
REF. 079151

Label holder Mosaic - for self-adhesive labels - curved - transparent
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND Mosaic™
REF. 079152

Label holder Mosaic - for self-adhesive labels - flat - transparent
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home
REF. 3523

Additional toroids for the bus meter with three inputs for toroids and actuator with sensor.
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home
REF. BT-3522N

Pulse counter interface bus to detect data coming from counter (water, gas,..) with pulse output. Powered BUS 27V.
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home Up
REF. F520

Device for the measurement of electric power on a maximum of three lines.
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home Up
REF. F521

Central unit for the management and control of the load control system actuators.
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home Up
REF. F522

Actuator with integrated current sensor for controlled load consumption module. 1 relay
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home Up
REF. F523

Relay actuator – for incandescent, fluorescent or ferromagnetic, LED and compact fluorescent lamps.
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND Mosaic™
REF. 050299

Tamperproof insert - for sockets - fits directly into the plug
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND Soliroc™
REF. 077885

Seal for surface correction Soliroc - for 1-gang plate
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND Soliroc™
REF. 077886

Seal for surface correction Soliroc - for 2-gang plate
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND Soliroc™
REF. 077887

Seal for surface correction Soliroc - for 3-gang plate
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND Mosaic™
REF. 089806

Key fob - for key fob switch
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO
REF. BT-3559

SCS USB programm.cable
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home Up
REF. 3476

1 relay actuator for single loads.
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home Up
REF. F430R3V10

Actuator with 3 independent relays and 2 x 0-10 Volts outputs.
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home Up
REF. F430R8

Actuator with 8 independent relays for the control of on-off &motorised valves, pumps and fan coils.
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home Up
REF. F430V10

Actuator with 2 x 0-10 Volt outputs for the control of 0-10 proportional valves - SCS bus connection, 2 DIN modules
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND -
REF. 048418

KNX room controller unit
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND -
REF. 048422

KNX Hotel room controller unit with 16 inputs and 16 outputs for hotel room management - 12 DIN modules
You can only compare 4 products, you must remove 1 to add this one
title
BTICINO My Home Up
REF. F422

Interface between SCS BUS based systems.
You can only compare 4 products, you must remove 1 to add this one