Name: Trip-free switch DMX³-I 2500 3 poles, draw-out version and with rated current of 2000A and electronic protection unit.
SKU: 028282

Trip-free switch DMX³-I 2500 3 poles, draw-out version and with rated current of 2000A and electronic protection unit.

REF. 028282 EAN. 3414972282505

DMX³-I2500, open switch for load breaking and isolation at the head of low-voltage installations, is a trip-free 3P draw-out device rated 2000A, 230V to 690V. Its 42kA breaking capacity and IP20 ensure reliable protection.

Compare You can only compare 4 products, you must remove 1 to add this one

Description

Product characteristics

Breaking capacity of 42kA, according to EN/IEC standard 60947 - 2, suitable for protection of high power industrialinstallations. Rated insulation voltage of 1000VRated impulse withstand voltage of 12kV
Climatic condition according to IEC/EN 60947 - 1 Annex Q, Cat. F subject to temperature,humidity, vibration, shock and salt mist.
Can be equipped with releases (undervoltage and shunt releases) and auxiliary contacts. Can used with rotary handles or motor operator. Locking Accessories are available.
Has diffent type of possible connection accessories: cage terminals, spreader and rear terminals.Is available also in a plug-in version (circuit breaker fitted with special terminals and mountedon a plug-in base) or in a draw-out version (a plug-in version fitted with a"Debro-lift" mechanism which can be used to withdraw the breaker whilekeeping it on its base)

The product's benefits

Installation

Electric and mechanical robustness, in addition to breaking capacity and options for accessorizing, are perfectly suited to increase service continuity, focusing on the plant’s energy efficiency and respecting “green aspects”.

Usage

DMX3 -I platform provides a complete "project" approach in the premium market segment, offering a range completely suitable for high-power applications

Avantages

Rear terminals are not mounted on the device by default to avoid having to buy and then discard them in case front terminal connections are used. The connection choice is made by the customer according to specific requirements, in order to optimize costs.

Technical characteristics

Rated permanent current Iu	2000 A
Rated voltage (Min-Max)	230-690 V
Device construction	Built-in device slide-in technique (withdrawable)
Integrated earth fault protection	No
Type of electrical connection of main circuit	Bolt connection
Suitable for DIN rail (top hat rail) mounting	No
DIN rail (top hat rail) mounting optional	No
Number of auxiliary contacts as normally closed contact	2
Number of auxiliary contacts as normally open contact	2
Number of auxiliary contacts as change-over contact	2
With switched-off indicator	Yes
With integrated under voltage release	No
Number of poles	3
Position of connection for main current circuit	Back side
Type of control element	Push button
Complete device with protection unit	No
Motor drive integrated	No
Motor drive optional	Yes

Degree of protection (IP)	IP20
Width	316 mm
Height	465 mm
Depth	433 mm
degree of impact strength (IK)	Not applicable
Operating / setting temperature (Min-Max)	-25-70 °C
Storage temperature (Min-Max)	-25-85 °C
Voltage type	AC
Frequency (Min-Max)	50-60 Hz
Electric supplying direction	By the rear of the product
Terminal marking indication	No
Colour	Other
RAL-number	7035
Halogen free	Yes
Terminals capacity (Min-Max)	50-2400 mm²
Cable nature for connection	Flexible or rigid
Label space/information surface	No
Contains Batteries	No

Trip-free switch DMX³-I 2500 3 poles, draw-out version and with rated current of 2000A and electronic protection unit.

Trip-free switch DMX³-I 2500 3 poles, draw-out version and with rated current of 2000A and electronic protection unit.

Description

Product characteristics

The product's benefits

Installation

Usage

Avantages

Technical characteristics

Documentation

Additional documents