Default welcome msg!


  • Information contained in this form is not saved or preserved by LEGRAND.
    Selected data are for email sending only

Class I + II (T1+T2) low voltage SPDs

Protection against transient overvoltagess for 230/400 V~ power networks (50/60 Hz).. SPDs compliant with EN/IEC 61643-11 standards . Recommended for main distribution boards. Class I+II (T1+T2) : SPDs tested and specifi ed according to both T1 and T2 test classes.

Items 1 to 25 of 26 total

Set Descending Direction
per page

Page:
  1. 1
  2. 2
  1. SPD - protection of main distribution board - T1+T2 - limp 8 kA/pole - 1P
    O/R
  2. SPD - protection of main distribution board - T1+T2 - limp 8 kA/pole - 2P
    O/R
  3. SPD - protection of main distribution board - T1+T2 - limp 8 kA/pole - 3P
    O/R
  4. SPD - protection of main distribution board - T1+T2 - limp 8 kA/pole - 4P
    O/R
  5. SPD - protection of main distribution board - T1+T2 - limp 8 kA/pole - 1P+N left
    O/R
  6. SPD - protection of main distribution board - T1+T2 - limp 8 kA/pole - 3P+N left
    O/R
  7. SPD - protection of main distribution board - T1+T2 - limp 8 kA/pole -1P+N right
    O/R
  8. SPD - protection of main distribution board - T1+T2 - limp 8 kA/pole -3P+N right
    O/R
  9. SPD - protection of main distribution board - T1+T2 - limp 12.5 kA/pole - 1P
    O/R
  10. SPD - protection of main distribution board - T1+T2 - limp 12.5 kA/pole - 2P
    O/R
  11. SPD - protection of main distribution board - T1+T2 - limp 12.5 kA/pole - 3P
    O/R
  12. SPD - protection of main distribution board - T1+T2 - limp 12.5 kA/pole - 4P
    O/R
  13. SPD - protection of main distribution board -T1+T2 -limp 12.5 kA/pole -1P+N left
    O/R
  14. SPD - protection of main distribution board -T1+T2 -limp 12.5 kA/pole -3P+N left
    O/R
  15. SPD -protection of main distribution board -T1+T2 -limp 12.5 kA/pole -1P+N right
    O/R
  16. SPD -protection of main distribution board -T1+T2 -limp 12.5 kA/pole -3P+N right
    O/R
  17. SPD - high risk level installation. - T1+T2 - limp 35 kA/pole - 440 V~(IT) -plug-in -1P
    O/R
  18. SPD - high risk level installation - T1+T2 - limp 25 kA/pole - 1P+N right
    O/R
  19. SPD - high risk level installation - T1+T2 - limp 25 kA/pole - 3P
    O/R
  20. SPD - high risk level installation - T1+T2 - limp 25 kA/pole - 3P+N right
    O/R
  21. Plug-in replacement modules for SPD - T1+T2 - 25 kA/pole
    O/R
  22. Plug-in replacement modules for SPD - T1+T2 - 25 kA/pole - N-PE modules
    O/R
  23. Plug-in replacement modules for SPD - T1+T2 - 35 kA/pole
    O/R
  24. Plug-in replacement modules for SPD - T1+T2 - 8 kA/pole
    O/R
  25. Plug-in replacement modules for SPD - T1+T2 - 12.5 kA/pole
    O/R

Items 1 to 25 of 26 total

Set Descending Direction
per page

Page:
  1. 1
  2. 2