Default welcome msg!


  • Information contained in this form is not saved or preserved by LEGRAND.
    Selected data are for email sending only

Viking™ 3 accessories for terminal blocks

Items 51 to 73 of 73 total

Set Descending Direction
per page

Page:
  1. 1
  2. 2
  3. 3
  1. Protective screen Viking 3 - 1 pole - screw - 1 entry/1 outlet - pitch 8,10
  2. Protective screen Viking 3 - 1 pole - screw - 1 entry/1 outlet - pitch 12,15
  3. Protective screen Viking 3 - to be cut -screw -1 entry/1 outlet -pitch 5,6,8,10
  4. Protective screen Viking 3 - to be cut -screw -1 entry/1 outlet -pitch 12,15
  5. Measurement socket Viking 3 - Ø2 mm plug - screw - pitch 10 mm
  6. Measurement socket Viking 3 - Ø4 mm plug - screw - pitch 12 mm
  7. Measurement socket Viking 3 - Ø4 mm plug - screw - for disconnect block
  8. Bridging combs Viking 3 - spring connection blocks - 2 blocks / pitch 10 - blue
  9. Bridging combs Viking 3 - spring connection blocks - 2 blocks / pitch 12 - blue
  10. End cap Viking 3 - fr spring terminal blocks - pitch 5 - 1 entry/1 outlet
  11. End cap Viking 3 - fr spring terminal blocks - pitch 5 - 1 entry/2 outlets
  12. End cap Viking 3 - fr spring terminal blocks - pitch 5 - 2 entries/2 outlets
  13. End cap Viking 3 - fr spring terminal blocks - pitch 5 - 2 levels
  14. End cap Viking 3 - fr spring terminal blocks - pitch 6 - disconnect type
  15. Separat./insulat. divider Viking 3-spring-1or2 entries / 1or2 outlets -pitch 5,6
  16. Separat./insulat. divider Viking 3 - spring connection - 2 levels
  17. Safety tip adaptor Viking 3 - IP2X - Ø2 mm test plug
  18. Supports (2) - for 45° rail slope - with 4 M6 screws, nuts, washers
  19. Label holder Viking 3 - with transparent 32 x 9.5 mm labels supplied
  20. Label for engraving Viking 3 - for label holder 395 96
  21. Black felt-tip marker pen - indelebile for marking
  22. Rail to be cut - symmetrical - depth 7.5 mm - with oblongs - L. 2 m
  23. Rail to be cut - symmetrical - depth 15 mm - with oblongs - L. 2 m

Items 51 to 73 of 73 total

Set Descending Direction
per page

Page:
  1. 1
  2. 2
  3. 3