Default welcome msg!


  • Information contained in this form is not saved or preserved by LEGRAND.
    Selected data are for email sending only

Viking™ 3 accessories for terminal blocks

Items 51 to 73 of 73 total

Set Ascending Direction
per page

Page:
  1. 1
  2. 2
  3. 3
  1. Joining rods Viking 3 - for handle and mini lever - for 2 blocks
  2. Mini lever Viking 3 - for disconnect blocks
  3. Handle lever Viking 3 - grey
  4. Handle lever Viking 3 - blue for neutral
  5. Blade lever Viking 3 - with handle lever for fuse cartridge 5x20
  6. End stop Viking 3 - 12 mm pitch - for symmetrical and asymmetrical rails
  7. End stop Viking 3 - 10 mm pitch - for symmetrical rails
  8. End stop Viking 3 - 8 mm pitch - for symmetrical rails
  9. End stop Viking 3 - automatic 6 mm pitch - screwless mounting - for sym. Rails
  10. Bridging combs Viking 3 - equipotential - for 2 blocks with 8 mm pitch - red
  11. Bridging combs Viking 3 - equipotential - for 3 blocks with 8 mm pitch - red
  12. Bridging combs Viking 3 - equipotential - for 2 blocks with 6 mm pitch - red
  13. Bridging combs Viking 3 - equipotential - for 10 blocks with 6 mm pitch - red
  14. Bridging combs Viking 3 - equipotential - for 10 blocks with 6 mm pitch - blue
  15. Bridging combs Viking 3 - equipotential - for 2 blocks with 5 mm pitch - red
  16. Bridging combs Viking 3 - equipotential - for 10 blocks with 5 mm pitch - red
  17. Bridging combs Viking 3 - equipotential - for 10 blocks with 5 mm pitch - blue
  18. Rail to be cut - symmetrical - depth 15 mm - theight 1.5 mm - L. 2 m
  19. Rail to be cut - EN 60715 - symmetrical - depth 7.5 mm - L. 2 m
  20. Flat copper bar 12 x 4 with clamp - for XL³ 400
  21. Brass bar with holes for protective conductor - for XL³ 400 - L. 456 mm
  22. Additional brass bar - for XL³ 160/400 cabinets
  23. Adaptor - for mounting on asymmetrical rail equipment fitting on sym. rail

Items 51 to 73 of 73 total

Set Ascending Direction
per page

Page:
  1. 1
  2. 2
  3. 3