Default welcome msg!


  • Information contained in this form is not saved or preserved by LEGRAND.
    Selected data are for email sending only

Transcab cable ducting

6.5 mm wide fingers with a 6 mm spacing. Accepts up to 6 mm² without breaking side wall finger. Two pre-scored lines allow removal of fingers. Bump on side wall fingers help cabling. Rounded fingers prevent injury during cabling. Conform to EN 500 85 parts 2 and 3. Plastic cable ducting (base + cover). Side perforations at intervals of 12.5 mm. Length: 2 m.

Items 16 to 30 of 36 total

Set Descending Direction
per page

  1. Cable ducting (base + cover) Transcab - 25x60 mm - light grey halogen free
  2. Cable ducting (base + cover) Transcab - 25x80 mm - grey RAL 7030
  3. Cable ducting (base + cover) Transcab - 40x100 mm - grey RAL 7030
  4. Cable ducting (base + cover) Transcab - 40x25 mm - grey RAL 7030
  5. Cable ducting (base + cover) Transcab - 40x40 mm - grey RAL 7030
  6. Cable ducting (base + cover) Transcab - 40x40 mm - light grey halogen free
  7. Cable ducting (base + cover) Transcab - 40x60 mm - grey RAL 7030
  8. Cable ducting (base + cover) Transcab - 40x60 mm - light grey halogen free
  9. Cable ducting (base + cover) Transcab - 40x80 mm - grey RAL 7030
  10. Cable ducting (base + cover) Transcab - 40x80 mm - light grey halogen free
  11. Cable ducting (base + cover) Transcab - 60x100 mm - grey RAL 7030
  12. Cable ducting (base + cover) Transcab - 60x40 mm - grey RAL 7030
  13. Cable ducting (base + cover) Transcab - 60x60 mm - grey RAL 7030
  14. Cable ducting (base + cover) Transcab - 60x60 mm - light grey halogen free
  15. Cable ducting (base + cover) Transcab - 60x80 mm - grey RAL 7030

Items 16 to 30 of 36 total

Set Descending Direction
per page