Default welcome msg!


  • Information contained in this form is not saved or preserved by LEGRAND.
    Selected data are for email sending only

Uprights, rails and fixing accessories for cabinets and enclosures

For mounting chassis and fixing wiring accessories.

Items 1 to 25 of 34 total

Set Ascending Direction
per page

Page:
  1. 1
  2. 2
  1. Rail to be cut - symmetrical - depth 15 mm - with oblongs - L. 2 m
  2. Rail to be cut - symmetrical - depth 7.5 mm - with oblongs - L. 2 m
  3. Clip nuts for cabinet frame and crosspieces - M8 screw
  4. Clip nuts for cabinet frame and crosspieces - M6 screw
  5. Supports (2) - for 45° rail slope - with 4 M6 screws, nuts, washers
  6. Rail to be cut - C profile - L. 2 m
  7. Claw - for symmetrical rail EN 60715 - width 35 mm - for M4 and M6 screws
  8. Rail to be cut - symmetrical - depth 15 mm - theight 1.5 mm - L. 2 m
  9. Rail to be cut - EN 60715 - symmetrical - depth 7.5 mm - L. 2 m
  10. Rail to be cut - EN 60715 - asymmetrical - L. 2 m
  11. M6-10 HF screw - with contact washer
    • New product
    Nut with CBL screw 6x10 for fixing equipment on C profile rail
  12. Rivet reinforced plastic Ø6 mm - for drilling Ø6.5 mm
  13. Stirrup - for fixing equipment on C profile rail - for M6 screw
  14. Fixing equipment - on rails EN 60715 - for M5 screw
  15. Fixing equipment - on rails EN 60715 - for M4 screw
  16. Fixomega - for symmetrical rail EN 60715 - for M4 screw
  17. Adaptor - for mounting on asymmetrical rail equipment fitting on sym. rail
  18. Fixobar - for rails EN 60715 - for M6 screw
  19. Fixobar - for rails EN 60715 - for M5 screw
  20. Fixobar - for rails EN 60715 - for M4 screw
  21. Cage nuts M6
  22. Cage nuts M5
  23. Cage nuts M4
  24. Clip nuts for perforated plates - for M6 screws

Items 1 to 25 of 34 total

Set Ascending Direction
per page

Page:
  1. 1
  2. 2