Default welcome msg!


  • Information contained in this form is not saved or preserved by LEGRAND.
    Selected data are for email sending only

Equipment for XL³ 4000 - for mounting on adjustable plates: DPX³ 1600 fixed version

Adjustable plates are used for front terminal/rear terminal connection and mounting of motor-driven or rotary handles.

15 Item(s)

Set Descending Direction
per page

  1. Adjustable plate XL³ 4000 - for 1 DPX 1600 fixed rear terminals - horizontal - 24 modules
  2. Metal faceplate XL³ 800/4000 - 1 DPX 1600 - horizontal - 1/4 turn - 24 modules
  3. Metal faceplate XL³ 800/4000 - 1 DPX 1600 - horizontal - captive screws - 24 modules
  4. Metal faceplate XL³ 4000 - 1 DPX 1600 rear terminals + front with rotary handle
  5. Metal faceplate XL³ 4000 - 1 DPX 1600 front terminals with motor-driven handle
  6. Metal faceplate XL³ 800/4000 - 1 DPX 1600 - horizontal - captive screws - 36 modules
  7. Plate XL³ 800/4000 - For 1 DPX-IS 1600 or DPX 1600 front terminals - 24 modules
  8. Plate XL³ 800/4000 - for 1 DPX IS 1600 or DPX 1600 front terminals - 36 modules
  9. Plate XL³ 800/4000 - For 1 DPX-IS 1600 or 1 DPX 1600 rear terminals - 36 modules
  10. Adjustable plate XL³ 4000 - 1 DPX 1600 draw out with front terminals-vert-24 modules
  11. Plate XL³ 800/4000 - For 1 DPX-IS 1600 or 1 DPX 1600 rear terminals - 24 modules
  12. Metal faceplate XL³ 800/4000 - for DPX 1600 vertical - 1/4 turn - 24 modules
  13. Metal faceplate XL³ 800/4000 - for DPX 1600 vertical - captive screws - 24 modules
  14. Metal faceplate XL³ 800/4000 - for DPX 1600 vertical - captive screws - 36 modules
  15. Metal faceplate XL³ 4000-DPX1600 with rotary or motor driven handle-vert-24 modules

15 Item(s)

Set Descending Direction
per page