Default welcome msg!


  • Information contained in this form is not saved or preserved by LEGRAND.
    Selected data are for email sending only

Distribution enclosures XL³ 6300

IP 30 - IK 07. Consist of the combination of a "roof-base" assembly, structural uprights, rear and side panels RAL 7035, plinths RAL 7004. Height 2200 mm, usable faceplate height 2000 mm.

Items 1 to 25 of 30 total

Set Descending Direction
per page

Page:
  1. 1
  2. 2
  1. Lifting rings (4) XL³ 4000/6300
  2. Joining screws XL³ 4000/6300 - for structural joining
  3. L-shaped reinforcement plates (2) XL³ 4000/6300 - for joining
  4. Flat reinforcement plates (2) XL³ 4000/6300 - for joining
  5. Metal faceplate XL³ 800/4000/6300 - for modular devices - 1/4 turn - 24 modules
  6. Support frame XL³ 4000/6300 - fixed for enclosure w.725/975 without sleeve
  7. Rear and side panels XL³ 4000/6300 - height 2200 mm - width 475 mm
  8. Rear and side panels XL³ 4000/6300 - height 2200 mm - width 725 mm
  9. Rear and side panels XL³ 4000/6300 - height 2200 mm - width 975 mm
  10. Plinth for XL³ 6300 enclosure - H. 100 x D. 475 x W. 1425 mm
  11. Plinth for XL³ 6300 enclosure - H. 100 x D. 725 x W. 1425 mm
  12. Plinth for XL³ 6300 enclosure - H. 100 x D. 975 x W. 1425 mm
  13. Roof base for XL³ 6300 enclosure - D. 475 x W. 1300 mm
  14. Roof base for XL³ 6300 enclosure - D. 725 x W. 1300 mm
  15. Roof base for XL³ 6300 enclosure - D. 975 x W. 1300 mm
  16. Set of 4 uprights for XL³ 6300 enclosures
  17. Functionnal uprights (x2) for XL³ 6300 enclosure - for fixing mounting equipment
  18. Fixing plate - for mounting DMX³ 6300 3P/4P fixed version in XL³ 6300 enclosure
  19. metal faceplate - for mounting DMX³ 6300 3P/4P in XL³ 6300 enclosure
  20. Fixing plate - for mounting DMX³ 6300 3P/4P draw-out in XL³ 6300 enclosure
  21. Rear panel for XL³ 6300 enclosure - width 1300 mm
  22. Symmetrical rail - for fixing modular device in XL³ 6300 enclosure - 36 modules
  23. Metal solid faceplate for XL³ 6300 enclosure - H. 200 x W. 1300 mm
  24. Metal solid faceplate for XL³ 6300 enclosure - H. 400 x W. 1300 mm
  25. DMX³ 6300 compartment kit - for form 4b

Items 1 to 25 of 30 total

Set Descending Direction
per page

Page:
  1. 1
  2. 2