Home /
Lighting management, emergency lighting, access control and safety equipment /
Lighting management and indoor/outdoor lighting /
Motion sensors for 1 circuit - motion sensors for passage areas without natural light /
Ideal for passage areas /
PIR IP 40 wall/flush-mounting motion sensor, 180°, without override /
180° motion sensor -IP40 -8 m -flush-mounting -without override -PIR -cardboard

CAT. N° 0 784 58

180° motion sensor -IP40 -8 m -flush-mounting -without override -PIR -cardboard

Zoom

Energy efficiency solution

Pack (number of units) 1
Volume (dm³) 0.235
Weight (g) 93.00

| Add to Compare

Download
this sheet

Print
this sheet

Email to a contact

Qty:

Product Description
More information

Product characteristics

2-wire motion sensors, without neutral

IR detection
Accepted power by lamp type:

LEDs: 3 to 100 W
compact fluorescent: 3 to 100 W
LEDs, CFLs, Halogen, fluo tubes with ferromagnetic or electronic transformer: 3 to 250 VA
halogen 230 V, incandescent: 3 to 250 W

For LED and compact fluorescent lamps
If several sensors are installed on the same circuit, the minimum load changes: refer to the technical sheet
Possibility to install up to 3 sensors in parallel
Time delay setting from 10 s to 10 min
Light level threshold setting from 5 lux to 1275 lux
Standby consumption : 0.2 W

Sensor without override

Cardboard
Range 8 m
Recommanded fixing height: 1.2 m
2-wire without neutral
Light level threshold: 5 to 1275 lux
Adjustable time delay: 10 s to 10 min
Standby consumption: 0.2 W

General characteristics

Mosaic™ Programme mechanisms - motion and presence sensors

All sensors are compatible with any lamp - Detection field: 120°
Detection range: 8 m
Recommended installation height: 1.20 m
Integrated self-protection against overloads and short-circuits.
2 modules

Product Description
More information

Catalogue pages & additional information	Selection chart (p.658) PC Selection chart (p.659) PC Description page (p.661) PC Technical page (p.662) PC Description page (p.880) PC Technical page (p.882) PC Motion sensors and Lighting Management sensors for controllers ANX
Installation instructions & related documents	Notice n° LE08095AD NP
Installation & technical data	Technical sheet n° F01983EN-03 FT

The information given in this e-catalogue (characteristics and dimensions) may be amended, and therefore does not represent an undertaking on our part. The e-catalogue is reserved for professionals only. You are also reminded that all products must be installed by a qualified professional in accordance with the installation rules.